Toro Toro STX-38 Stump Grinder

Description

Toro® STX-38 Stump Grinder is built for outstanding durability in the toughest conditions. Fully hydraulic operation means no chance of expensive belts breaking or slipping and no tension adjustments. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. And with easy-to-use TX-style controls and tracks for maneuverability and stability, the STX-38 is extremely operator-friendly. The STX-38's electronic fuel injection engine provides less maintenance, easier starting, and improved performance. Best of all, ground speeds of 4.5 mph allow you to spend more time grinding — and less time transporting the machine — for greater productivity.

Features

• Intelli-sweep® automatically adjusts cutting head sweep speed
• Turn stumps to chips quickly
• Hydraulically driven cutting head
• No tire ruts or flat tires
• Intelli-sweep®: Intelli-sweep automatically adjusts cutting head sweep speed based on the load on the wheel, so the engine runs efficiently during heavy loads.
• Faster and Easier: From pine to oak, the Toro STX hydraulic stump grinder turns stumps to chips quickly and efficiently.
• Advanced Cutter Head: Hydraulically driven cutting head with hydraulic flow directly to cutter head for maximum performance. Design minimizes maintenance with no belts or pulleys to replace.
• Innovative Track System: Low center of gravity and large footprint increases stability on hillsides. Tracks handle soft, wet ground conditions, climb curbs and allow zero-turn capability.

Specifications

• Compliance: CE and EPA compliant
• Cutter Depth - Below Grade: 18 in. / 45. 7 cm
• Cutter Height - Above Grade 35 in. / 88.9 cm
• Engine Cooling System Air Cooled
• Engine Horsepower 38 hp
• Engine Make Kohler
• Engine Model: Kohler® Command PRO® ECV980 4-cycle
• Fuel Type: Gasoline
• Head Swing: 52" (132 cm) arc length x 60° sweep arc
• Height: 51 in. / 129.5 cm
• Hydraulic Pressure: 3,000 PSI (207 BAR)
• Hydraulics: Dual hydrostatic traction drive – 16 cc hydropumps with 15 gpm max flow to each side; 20 gpm gear pump flow to the piston motor driving the cutter head
• Length: 95 in. / 241. 3 cm
• Start Method: Electric
• Transmission: Hydrostatic
• Travel Speed - Forward: Up to 4.5 mph / 7.2 kph
• Weight: 1,750 lbs / 794 kg
• Wheel: 22.25" (56.5 cm) diameter to tooth; 1" (2.5 cm) thick; 16 grinder teeth
• Width: 34 in. / 86.3 cm

Product Specs

Engine

General